Company News | 2020.08.09
Metal stamping copper accessories
When metal stamping accessories, it may be overturned and twisted. There are many reasons for this phenomenon. Next, we will introduce you in detail!
If the copper stamping part is overturned and twisted during blanking. At this time, it is necessary to study the cutting edge and check whether the blanking clearance is reasonable at any time. If it is caused by the instability of the stamping part during bending, U-V bending needs to be dealt with.
In order to solve this problem, it is caused by the guide position before bending and the sliding of guide position during bending. If your precision stamping parts have been overturned and deformed, resulting in poor forming, then you need to reduce the stamping load to solve the problem.

Copyright 2019-2020 Jinjue Metal & Plastic (Shenzhen) Co., Ltd.